Equalizing Beam and Components
REAR SUSPENSIONS
■ One-piece Torque Rods Smart Numbering System | TRAAX ROD ®
The TRAAX ROD ® , one-piece torque rod family follows the Smart Numbering System, in which the digits signify the body style, bushing combination, bushing hole diameter, bushing clocking angle and the torque rod length, see illustration below. TRAAX ROD bushings are non-serviceable, the entire torque rod assembly requires replacement. Visit www.traaxrods.com for more information
BUSHING COMBINATION Bushing 1
Bushing 2
Straddle
Taper
Straddle
Taper
A Mounting Center
B Length
C Thread
A Mounting Center
B Length
C Thread
Hole Diameter
Hole Diameter
40 41 44
5 ⁄ 8 " ¾" 5 ⁄ 8 "
4 3 ⁄ 8 " 4 3 ⁄ 8 " 4 3 ⁄ 8 "
5 ⁄ 8 " ¾"
4 3 ⁄ 8 " 4 3 ⁄ 8 "
3"
1¼"
45
¾" 1¼" Recommended for 40K to 52K pound capacity suspensions in most vocational applications. 4 3 ⁄ 8 " 3"
30 32
5 ⁄ 8 " 7 ⁄ 8 "
4 3 ⁄ 8 " 5¼"
5 ⁄ 8 " 7 ⁄ 8 "
4 3 ⁄ 8 " 5¼"
33
5 ⁄ 8 "
4 3 ⁄ 8 "
3"
1¼"
35
7 ⁄ 8 "
5¼"
3"
1¼"
36
3" 1¼" Recommended for 60K to 70K pound capacity suspensions or 40K to 52K pound capacity suspensions for even longer service intervals. 1¼" 3"
82
www.hendrickson‑intl.com | Reference Lit. No. 45745-147
Powered by FlippingBook