Torque Rods and Replacement Bushings
REAR SUSPENSIONS
Two-piece Torque Rods | ULTRA ROD PLUS Empty End Hubs — offer added versatility to ULTRA ROD PLUS torque rods. Empty end hubs allow the use of any PLUS and XTRB bushing con- figuration from existing Hendrickson torque rods.The two‑piece design requires stocking only two part numbers, eliminating multiple torque rod inventory. Refer to Torque Rod Bushings Section for specific torque rod bushing information. Empty End Hubs TUBE END SPACER END
Preassembled with Bushings TUBE END
SPACER END
Torque Rod
Replacement Bushing
A Length
Hole Diameter mm inch
B Mounting Center
Spacer End Part No.
Part No.
mm inch
64400-002L ♦ 66649-002L
4 3 ⁄ 8 " (111.13 mm) 51/4" (133.4 mm)
46661-001H 46661-002H
16.6
5 ⁄ 8
772 30 3 ⁄ 8
46661-005H
♦ 66649-003L
23.1
15 ⁄ 16
Replacement Bushing
Hole Diameter mm inch
Tube End Part No.
A Mounting Center
Part No.
46610-001 46610-003 46610-004 ✱ 46610-005
64400-002L ♦ 66649-002L ♦ 66649-005L 64400-002L
4 3 ⁄ 8 " (111.13 mm)
16.6
5 ⁄ 8
Torque Rod
Replacement Bushing
A Length
B Taper Pin
C Thread
Spacer End Part No.
Part No.
mm inch
mm inch inch
64400-004L ♦ 66649-004L
46681-001H 46681-002H
772 30 3 ⁄ 8
73.66 2 7 ⁄ 8
11/4
✱ 5° Clocking angle ♦ XTRB Bushings
79
Reference Lit. No. 45745-148 | 1-866-755-5968
Powered by FlippingBook