HN ™ • HNT ™
REAR SUSPENSIONS
VEHICLE
VEHICLE
KEY NO. PART NO.
DESCRIPTION
QTY.
KEY NO. PART NO.
DESCRIPTION
QTY.
1 2 3 4 5 6 7 8 9
50787-0XX 25114-011 22962-027 48949-000 49399-000 18160-011 22962-029 48948-000 49395-000 22962-001 22962-004 30585-000 49976-XXX 22962-001 22962-004 30585-000 25114-011 22962-027 48949-000 49972-000 56910-000 64718-000L 50698-000 22962-028 49983-000 49768-000 32043-004 47764-000 48570-000 49769-000 49770-000
*Saddle Assembly, Includes Key Nos. 2-4, 6-9
2
32 33 34 35 36
49771-000 49778-000 60670-002L 44643-011
Clevis
2 4 4 1
7 ⁄ 16 " Bolt
16 32 16
5 ⁄
8 " Hex Nut
7 ⁄ 16 " Washer 7 ⁄ 16 " Locknut
Shock Absorber
Cross Tube
Rebound Rubber Stop Kit, One Side, Includes Key Nos. 6-9
Thru-Bolt Bushing Kit, One Wheel End, Includes Key Nos. 37-38
5 ⁄ 16 " Bolt
4 8 4 2 4 4 4 2 4 4 4
34013-049L 34013-073L 45900-000L
HN 40K HN 46K
5 ⁄ 16 " Washer 5 ⁄ 16 " Locknut
37 38
Bushing
4 4
Adapter Kit, One Wheel End
Rebound Rubber Stop
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
¾" Inner Washer 5 ⁄ 8 " Outer Washer
45000-007L 21140-034L
HN 40K HN 46K
Bar Pin End Bushing Service Kit, One Wheel End, Includes Key Nos. 40-44
5 ⁄
8 " Locknut
39
*Beam Assembly, Specify Length, Includes Key Nos. 17-25, 36 or 39
34013-088L 34013-188L
Shim Type
¾" Inner Washer 5 ⁄ 8 " Outer Washer
Rotating, Shim Type *Bar Pin End Bushing
40 41
4 8
5 ⁄
8 " Locknut
Bar Pin Shim
7 ⁄ 16 " Bolt
16 32 16
50130-000 50131-000 48941-000 22962-008 48942-000 60218-000 47691-000L 22186-000 45045-010 60215-000
0.19"/0.19" 0.25"/0.12"
7 ⁄ 16 " Washer 7 ⁄ 16 " Locknut
42 43 44 45 46 47 48 49 50 51 52
1"-8 UNC x 6" Hex Bolt 1" Hardened Washer
4 8 4
Nylon Bushing
2 2 2 2 4 2 2 2 2 2 2
End Cap
1"-8 UNC Locknut
**** Two-Piece ULTRA ROD ® Longitudinal Torque Rod Straddle / Straddle Kit, Includes Key No. 46
Bolster Springs (2-piece)
¼" Bolt
¼" Washer ¼" Locknut
ULTRA ROD Straddle Bushing Torque Rod Frame Bracket
4 4 2
Rebound Control Kit, One Side, Includes Key Nos. 27-33
Backup Plate, Replaces 45045-003
***** Two-Piece ULTRA ROD Transverse Torque Rod Straddle /Taper Kit, Includes Key No. 50-51
5 ⁄ 5 ⁄
8 " Bolt
8 " Locknut
47691-000L 64697-000L
ULTRA ROD Straddle Bushing ULTRA ROD Taper Bushing ***Transverse Rod Axle Bracket
2 2 2
Rebound Control Spring
Anti-Roll Rod
Threaded Washer
NOTES: * No longer available. Contact Hendrickson to upgrade to a conversion. ** Item included in kit/assembly only, part not sold separately.
*** Not supplied by Hendrickson, used for reference only. Hendrickson is not responsible for components supplied by the vehicle manufacturer. For assistance with maintenance and rebuild instructions on these components see vehicle manufacturer. **** Hendrickson’s part number is stamped on the rod for identification. Be sure and include suffix number when ordering, this number indicates rod length. Hendrickson two-piece ULTRA RODS ® can be used to create the desired length, see Torque Rod Selection Guide 45745-148. ***** Transverse rods are mandatory for HN Suspensions regardless of axle spacing. See Literature No. 59310-004 and 59310-058 for more information.
559
Reference Lit. No. SP-179 | 1-866-755-5968
Powered by FlippingBook