Equalizing Beam and Components
REAR SUSPENSIONS
Equalizing Beams Center Bushings | AR2 • R • RS • RT • RTE • ULTIMAAX Bronze Center Bushing Service Kits
One (1) kit required per beam Rubber Center Bushings
Bronze Tube & Nut Ends
Loose Plug
Welded Plug
34013-053 34K 34013-054 38K•40K•44K•46K 48K•50K•52K 34013-055 65K Qty. Description 1 Bronze Center Bushing 1 Beam Center Sleeve 2 Beam Center Seal 4 Thrust Washer 1 Grease Fitting
34013-080 Solid Sleeve 34013-081 Hollow Sleeve 34013-078 Solid Sleeve 34013-079 Hollow Sleeve Qty. Description 2
Part No.
Description AR2 • R • RS • RT • RTE
06664-000L 34K•40K 49400-000L 34K•38K•40K 05919-000L 38K•40K 29483-005L 44K•46K•48K•50K•52K
Bronze Center Bushing Beam Center Sleeve
1 2
10366-000L 65K 15464-000 85K 14110-000 100K•120K ULTIMAAX
Thrust Washer
69538-000L 46K•52K•54K•58K•60K•63K 78676-001 70K, includes Circlip (Not Shown)
Center Bushing End Plugs for Cross Tube Replacement | AR2 • R • RS • RT • RTE • ULTIMAAX
Bronze Center sleeve Part Number
Suspension Capacity
Rubber Center Bushing Assembly Part Number
End plug part number
End plug part number
*34K through 54K
06664-000L 22279-000L 05919-000L 22282-000L
34K
22278-000
14684-000
22278-000
38K
✚ 49400-000L ✚ 49600-000L
22281-000
14685-000
57263-000
40K
29483-005L 34013-097L
46K to 52K
✱ On heavy-duty suspensions over a 52,000 pound capacity, Hendrickson recommends removal of both equalizing beams as part of cross tube replacement.Therefore center bushing end plugs are not available for these higher capacity suspensions. Refer to the applicable Technical Procedure Publications available online at www.hendrickson-intl.com for more information. ✚ High confinement bushings.
55
Reference Lit. No. 45745-147 | 1-866-755-5968
Powered by FlippingBook