HAULMAAX ®
REAR SUSPENSIONS
VEHICLE
VEHICLE
KEY NO. PART NO.
DESCRIPTION
QTY.
KEY NO. PART NO.
DESCRIPTION
QTY.
49
One-piece Longitudinal Torque Rod Assembly, Straddle / Straddle, Specify Length in mm ULTRA ROD ® , Includes Key No. 51
52
64697-000L
Taper Bushing 2 Optional Two-Piece Torque Rod Assembly with Bushings Service Kit
62000-XXX 62001-XXX
Front
1 1 2
60218-000 60215-000 65781-000 65781-001 65781-002 22186-000 45045-010 49689-000L 70867-001
ULTRA ROD Straddle / Straddle ULTRA ROD Straddle /Taper ULTRA ROD PLUS Straddle /Taper
Rea
8240-00XX-XXX
*******TRAAX ROD ® , Replaces 72000-XXX
and 72001-XXX
XTRB Straddle / Straddle XTRB Straddle /Taper Torque Rod Frame Bracket
50
*****One-piece Transverse Torque Rod Assembly, 2 Straddle /Taper, Specify Length in mm
53 54 55
2 2
62350-XXX ULTRA ROD, Includes Key Nos. 51-52 8244-0099-XXX *******TRAAX ROD, Replaces 72350-XXX 8233-0099-XXX *******TRAAX ROD, Replaces 92350-XXX
Backup Plate, Replaces 45045-003
Torque Rod Shim
As Req.
P-80 Lubricant - 10 ml (Not Shown)
per Bushing 1
51
47691-000L
Straddle Bushing
6
FIGURE 1
FIGURE 2
NOTES: * Item included in kit / assembly only, part not sold separately. ** HAULMAAX 46K suspensions must be serviced with the new tie-bar bolster spring Kit No. 64179-048.All HAULMAAX 40K suspensions can be serviced using the existing bolster springs Kit No. 64179-049 or if preferred, tie-bar bolster spring Kit No. 64179-048. Refer to Hendrickson Technical Bulletin Literature No. SEU-0225 for more information. *** For vehicles built prior to January 2003 it will be necessary to replace the saddle assembly with the current production saddle assembly and corresponding outboard frame bracket. **** For vehicles built prior to November 2007, Kit No. 57974-046 is required when replacing the load spring contact plate or equalizing beam. ***** Transverse torque rods are mandatory for the HAULMAAX suspensions regardless of axle spacing, see Literature No. 59310-004 and 59310‑058 for more information. ****** Not supplied by Hendrickson, used for reference only. Refer to vehicle manufacturer for more information. Hendrickson is not responsible for components supplied by vehicle manufacturer. ******* Longitudinal and transverse TRAAX ROD bushings are non-serviceable, the entire torque rod assembly requires replacement. Visit TRAAX ROD website www.traaxrods.com for more information.
HENDRICKSON HAULMAAX/HN Gauge can be obtained on-line at www.hendrickson-intl.com/Litform • Literature number 48422-546 – Bolster Spring • Literature number 48422-590 – Progressive Load Spring
TO obtain a new Hendrickson HAULMAAX Decal , No. 60905-002, contact Hendrickson.
482
www.hendrickson-intl.com | Reference Lit. No. SP-171
For Special Tools see Page 566
Powered by FlippingBook