PRIMAAX ® EX • PRIMAAX ® – International Vehicles
REAR SUSPENSIONS
■ Severe Service Kits
PRIMAAX EX • PRIMAAX Service Kit Nos. 60632-043 – 1 FASTENERS, INCLUDES KEY NOS. 1-4, 5B-7B, 8 60632-033 – 1¼ FASTENERS (REQUIRES HENDRICKSON APPROVAL) INCLUDES KEY NOS. 1-4, 5A-7A, 8
KEY NO. CONTENTS
KIT QTY.
1 2 3 4
QUIK-ALIGN Pivot Bushing
2 4 2 2 2 2 4 4 2 2 2
Confinement Washer
QUIK-ALIGN Concentric Collar QUIK-ALIGN Eccentric Collar
5 a
1¼"-12 UNF x 8" Bolt 1"-14 UNF x 7½" Bolt 1¼" Hardened Washer 1" Hardened Washer 1¼"-12 UNF Nylocknut 1"-14 UNF Nylocknut
b
6 a
b
7 a
b
8
P-80 Bushing Lubricant - 10 ml. (per Bushing 1)
PRIMAAX EX • PRIMAAX Service Kits 60632-015 – 1¼ FASTENERS, INCLUDES KEY NOS. 1-2, 3A-5A 60632-019 – 1 FASTENERS, INCLUDES KEY NOS. 1-2, 3B-5B
KEY NO. CONTENTS
KIT QTY.
1 2
QUIK-ALIGN Concentric Collar QUIK-ALIGN Eccentric Collar
2 2 2 2 4 4 2 2
3 a
1¼"-12 UNF x 8" Bolt 1"-14 UNF x 7½" Bolt 1¼" Hardened Washer 1" Hardened Washer 1¼"-12 UNF Nylocknut 1"-14 UNF Nylocknut
b
4 a
b
5 a
b
PRIMAAX 230 • 460 • 690 | 230T • 460T • 690T 8½"-10½"-12½"-14 3 ⁄
8 "-15½" RIDE HEIGHT, DOES NOT INCLUDE TOP PAD
SERVICE KIT 58821-026
KEY NO. CONTENTS
KIT QTY.
1 2 3
M24 x 3-6G Hendrickson Coated Hex Bolt
2 4 2
M24 Hardened Washer M24 x 3-6H Locknuts
NOTES: Quantities specified are shown for a tandem suspension.Adjust quantities for single or tridem suspensions. Quantities of service kit components may vary from amount shown in lists. * Item included in assembly / kit only, part not sold separately. ** Transverse rods are mandatory for the PRIMAAX EX • PRIMAAX suspensions regardless of axle spacing, see Literature No. 59310-004 and 59310-058 for more information.TRAAX ROD bushings are non-serviceable, the entire torque rod assembly requires replacement.Visit TRAAX ROD website www.traaxrods.com for more information. ** S-cam is not required for disc brakes. *** Alternate configuration of the QUIK-ALIGN fasteners.The locknuts located inboard will allow additional clearance for wider tires or tires with chains.Tightening is still required ONLY on the locknut. **** No longer available for service, see Replacement Guide on Page 441. For more information, refer to Hendrickson Technical Bulletin Literature No. SEU‑0229 or contact Hendrickson Tech Services.
425
Reference Lit. No. SP-233 | 1-866-755-5968
Powered by FlippingBook