FIREMAAX ® EX
REAR SUSPENSIONS
FIREMAAX EX Parts Lists
Small Clamp Group
Large Clamp Group
Vehicle Manufacturers
Page No.
Page No.
E-One
328 332 336 340 344 348 352 356
330 334 338 342 346 350 354 358 360
Ferrara
KME
Pierce
Rosenbauer
Seagrave Spartan Sutphen
Top Pad • Bottom Cap Selection Guide
–
NOTES: Quantities specified are shown for single suspension.Adjust quantities for tandem or tridem suspensions. Quantities of service kit components may vary from amount shown in lists. * Item included in kit / assembly only, part not sold separately. ** Transverse torque rods are mandatory for the FIREMAAX EX suspensions regardless of axle spacing, see Literature Nos. 59310‑004 and 59310-058 for more information.TRAAX ROD bushings are non-serviceable, the entire torque rod assembly requires replacement.Visit TRAAX ROD website www.traaxrods.com for more information. *** Non-serviceable torque rod bushings, requires replacement of complete torque rod assembly that includes bushings. **** S-cam bracket is not required for the vehicles equipped with Air Disc Brakes. ♦ Alternate configuration of the QUIK-ALIGN fasteners.The locknuts located inboard will allow additional clearance for wider tires or tires with chains.Tightening is still required ONLY on the locknut. NOTE: For Severe Service kits, See Page 413.
230
www.hendrickson‑intl.com | Reference Lit. No. SP-337
For Special Tools see Page 581
Powered by FlippingBook