AR2 ™
REAR SUSPENSIONS
VEHICLE
VEHICLE
KEY NO. PART NO.
DESCRIPTION
QTY.
KEY NO. PART NO.
DESCRIPTION
QTY.
62
Torque Rod Axle Bracket
2
65 66 67 68 69 70
32043-019 22962-004 47764-000 70867-001 65202-001 66029-000 48940-000
5 ⁄ 8 "-11 UNC x 5½" Bolt 5 ⁄ 8 " Hardened Flat Washer
4 8 4
46868-000 48042-000 49689-000L 45045-001 45045-002 45045-010
For Meritor Axle For Dana Axle
5 ⁄ 8 "-11 UNC Locknut
63 64
Torque Rod Shim (As Required)
P-80 Lubricant - 10 ml (Not Shown)
Per Bushing
Torque Rod Back-up Plate
As Req.
Pressure Protection Valve, See plumbing diagram 1 In Cab Air Dump Switch, See plumbing diagram 1
1 ⁄ 8 " Thickness ¼" Thickness
In Cab Air Switch Plate (Not Shown)
1
3 ⁄ 8 " Thickness, Replaces 45045-003
NOTE: * Item included in assembly/kit only, part not sold separately. ** Hendrickson’s part number is stamped on the torque rod for identification. Be sure to include the suffix number when ordering, this number indicates torque rod length. Hendrickson’s two-piece ULTRA ROD PLUS can be used to create the desired length, see literature number 45745-148. *** Transverse torque rods are mandatory for the AR2 Suspension regardless of axle spacing and require rubber center bushings, see Literature No. 59310-004 and 59310-058 for more information. **** Longitudinal and transverse TRAAX Rod bushings are non-serviceable, the entire torque rod assembly requires replacement. Visit TRAAX ROD website www.traaxrods.com for more information.
TABLE 1 Key No. 3
Corresponding Center Bushing End Plug for Cross Tube Replacement
Capacity
Rubber Center Bushing 49600-000L • 49400-000L 34013-097L • 29483-005L
End Plug Part Number
40K 46K
22281-000
296
www.hendrickson-intl.com | Reference Lit. No. SP-177
Powered by FlippingBook