AR2 ™ – Manitowoc
REAR SUSPENSIONS
VEHICLE
VEHICLE
KEY NO. PART NO.
DESCRIPTION
QTY.
KEY NO. PART NO.
DESCRIPTION
QTY.
1
Equalizing Beam Assembly
2
30 31 32 33 34 35
32043-019 66100-001 66099-001 66142-001
5 ⁄ 8 "-11 UNC x 5½" Hex Bolt 3.6" Rebound Bracket Tube Rebound Strap Support Plate
6 2 4 2 2 2
See Selection Guide 45745-147
2
44643-009L
Cross Tube 44 7 ⁄ 1 suspension, refer to Lit. No. SP-168 Parts List) 8 ", (If converted from RT•RTE
Equalizing Beam Rebound Strap Assembly
3
Rubber Center Bushing
2
****Trailing Arm Stop Bar
See Table 1 on Page 296
****Rebound Strap Bracket and
29483-005L 34013-097L
Welded End Plug with Loose End Plug
Axle Stop Assembly ****Air Spring Bracket Front
36
Bar Pin End Bushing Service Kit, One Wheel End
4
2 1 1
34013-324
Shim Type, Includes Key Nos. 5a, 6a,7 Rotating Bar Pin, Shim Type, Includes Key Nos. 5a, 6b, 7
Rear Left Hand Rear Right Hand
Not Shown 34013-332
Single Upper Air Spring Fasteners Service Kit, Includes Key Nos. 37-38
49177-018
5
Bar Pin Shim
8
a b c
50131-000 50130-000 57026-000
0.25" / 0.12" Standard 0.19" / 0.19" Optional 0.375" Optional flat shim
37 38
17700-031 22962-001 34013-328 65455-002L 22962-031 17700-010 64178-025 60665-020L 22962-001 49842-000 50764-005 50764-019 50764-021
¾"-16 UNF Nylocknut ¾" Hardened Washer
4 4
Single Air Spring and Lower Fasteners Service Kit, Includes Key Nos. 39-41
6
*Bar Pin End Bushing
4
a b
Shim Type
39 40 41
Air Spring
4 8 8
Rotating Bar Pin, Shim Type (Not Shown) Bar Pin End Bushing Fastener Kit, One Wheel End, Includes Key Nos. 8-10
½" Hardened Washer ½"-13 UNC Nylocknut
7
34013-323
Single Shock Absorber Service Kit with Fasteners, Includes Key Nos. 42-47
8 9
*1"-8 UNC x 7" Hex Bolt *1" Hardened Washer
8
16
42 43 44 45 46 47 48 49
Shock Absorber
2
10 11
*1"-8 UNC Locknut
8
¾" Hardened Washer ¾"-10 UNC Locknut ¾"-10 UNC x 3" Bolt ¾"-10 UNC x 4½" Bolt ¾"-10 UNC x 6" Bolt ****Upper Shock Bracket Lower Shock Bracket
12
Frame Hanger Assembly ****Left Hand
4 2 2 2 2
1 1
****Right Hand
Trailing Arm Assembly, Includes Key Nos. 12, 13, 20-23
65655-009 65655-010
Left Hand Right Hand
1 1
91704-001 91704-002 59013-000
Left Hand Right Hand
1 1
12
Trailing Arm *Left Hand
Height Control Valve Service Kit, One Side Includes Key Nos. 50-52
1 1
*Right Hand
Trailing Arm Bushing Service Kit, One Beam End, Includes Key Nos. 13-14
34013-112L
50 51 52 53
60501-000
Height Control Valve *¼" Hardened Washer *¼"-20 UNC Locknut Linkage Assembly Includes Key Nos. 54-60
2 4 4
13 14 15 16 17 18 19 20 21 22 23
*Trailing Arm Bushing
2 2 2 4 2 4 2 4 8 8 8
21140-053L 45289-003 45871-000 30550-005 22962-008 08017-000 58795-000 06696-000 22962-002 04842-000 34013-330 57878-009 66091-000 34013-331 32043-011 22962-004 47764-000 66100-000
Adapter Assembly, Includes Key Nos. 15-19
Adapter Tube
Trailing Arm Adapter 1"-14 UNS x 9¾" Bolt 1" Hardened Washer 1"-14 UNS Locknut
58994-035 58994-036
Right Hand Left Hand
1 1 2 2 2 4 4 4 4
54 55 56 57 58 59 60 61
*Linkage Extension Rod *Adj.Valve Arm Joint
Saddle Cap
*Valve Arm Clamp
7 ⁄ 8 "-14 UNF Saddle Cap Stud
* 5 ⁄ * 5 ⁄
16 "-18 UNC Stud
7 ⁄ 8 " Hardened Washer 7 ⁄ 8 "-14 UNF Locknut
16 "-18 UNC Jam Nut
* 5 ⁄ 16 " Hardened Washer
Trailing Arm Rebound Strap Service Kit, One Side, Includes Key Nos. 24-29
* 5 ⁄
16 "-18 UNC Locknut
Adjustable Longitudinal Torque Rod Assembly, Straddle/Straddle, Includes Key No. 62
24 25
Trailing Arm Rebound Strap 3 7 ⁄ 8 " Rebound Strap Tube
2 2
80918-001 80918-002 47691-000
Front Rear
1 1 4 2
Equalizing Beam Rebound Strap Service Kit, One Side, Includes Key Nos. 7, 26-29,33
62 63
ULTRA ROD Straddle Bushing
26 27 28 29
5 ⁄ 8 "-11 UNC x 5" Hex Bolt
2
8244-0099-590 ***Transverse TRAAX ROD ® one-piece,
5 ⁄ 8 " Washer
16
Straddle / Taper, 590 mm Length
5 ⁄ 8 "-11 UNC Locknut 3" Rebound Strap Tube
8 4
64
70867-001
P-80 - 10 ml (Not Shown)
Per Bushing
NOTE: * Item included in assembly/kit only, part not sold separately. ** Hendrickson’s part number is stamped on the torque rod for identification. Be sure to include the suffix number when ordering, this number indicates torque rod length. Hendrickson’s two-piece ULTRA ROD can be used to create the desired length, see literature number 45745-148. *** Transverse torque rods are mandatory with the AR2 Suspension regardless of axle spacing and require rubber center bushings, see Literature No. 59310-004 and 59310-058 for more information.TRAAX ROD bushings are non-serviceable, the entire torque rod assembly requires replacement.Visit the TRAAX ROD website www.traaxrods.com for more information. **** AR2 for Manitowoc welded component per the vehicle manufacturer, illustration for reference only. Contact the vehicle manufacturer for preventive maintenance and service instructions.
293
Reference Lit. No. SP-177 | 1-866-755-5968
Powered by FlippingBook