Hendrickson Truck Parts Catalog

FIREMAAX ® EX

REAR SUSPENSIONS

SMALL LARGE CLAMP GROUP CLAMP GROUP PAGE NO. PAGE NO.

FIREMAAX EX OEM Parts Lists

■ E-One

278

280

■ Ferrara

282

284

■ KME

286

288

■ Pierce

290

292

■ Rosenbauer

294

296

■ Seagrave

298

300

■ Spartan

302

304

■ Sutphen

306

308

■ Top Pad • Bottom Cap – Large Clamp Group

310

Selection Guide

NOTES: * Quantities specified are shown for single suspension.Adjust quantities for tandem or tridem suspensions. Quantities of service kit components may vary from amount shown in lists. ** Item included in kit / assembly only, part not sold separately. *** Transverse torque rods are mandatory for the FIREMAAX EX suspensions regardless of axle spacing, see Literature Nos. 59310‑004 and 59310-058 for more information.TRAAX ROD bushings are non-serviceable, the entire torque rod assembly requires replacement.Visit TRAAX ROD website www.traaxrods.com for more information. **** Non-serviceable torque rod bushings, requires replacement of complete torque rod assembly that includes bushings. ***** S-cam bracket is not required for the vehicles equipped with Air Disc Brakes. ♦ Alternate configuration of the QUIK-ALIGN fasteners.The locknuts located inboard will allow additional clearance for wider tires or tires with chains.Tightening is still required ONLY on the locknut. NOTE: For Severe Service kits, See Page 361.

276

www.hendrickson‑intl.com | Reference Lit. No. SP-337

For Special Tools see Page 511

Powered by