Hendrickson Truck Parts Catalog

STEERTEK ™ NXT Axle – MaxxPower ™ International Truck Built prior to December 2012

FRONT SUSPENSIONS

VEHICLE

VEHICLE

KEY NO. PART NO.

DESCRIPTION

QTY.

KEY NO. PART NO.

DESCRIPTION

QTY.

1

66906-002

***Axle & Kingpin Assembly with Axle Brackets 1 12K,. 4.25 Drop, 70.9 KPI, Replaces 66906-001 Left Hand Lower Steering Knuckle Assembly 1

12

60236-001

5 ⁄ 8 "-11 UNC Socket Head Cap Screw Loctite (Red) Compound Tube

4 1 1

Not Shown 60937-000

13

Tie Rod Assembly, Includes Key Nos. 14-16 12K, 4.25 Drop, 70.9 KPI, 8.35" Ride Height <200" Ackermann, Replaces 60239-001 >200" Ackermann, Replaces 60239-002 Tie Rod End Service Kits, Axle Set , Includes Kit Nos. 60961-736 & -741 Left Hand , Includes Key Nos. 14, 16-18 Right Hand , Includes Key Nos. 15-18 Left Hand Tie Rod End, Replaces 64000-001 Right Hand Tie Rod End, Replaces 64000-002

2

58900-075 58900-073

<200" Ackermann >200" Ackermann

76877-001 76877-002

3

Right Hand Lower Steering Knuckle Assembly

1

58900-076 58900-074

<200" Ackermann >200" Ackermann

60961-734 60961-736 60961-741 70995-001 70995-002 22962-007 17800-004 60961-069 60238-001 60240-000 64246-000 64578-000 69921-014

4

Left Hand Upper Steering Knuckle Assembly

1

14 15 16 17 18 19 20 21 22 23

1 1 2 2 2

60903-042 60903-056 60904-034 60961-039

ProStar Vehicles LoneStar Vehicles

5

Right Hand Upper Steering Knuckle Assembly Kingpin Bushing with Roller Thrust Bearing Service Kit, One Side, Includes Key Nos. 6-12 & Loctite

1

* 7 ⁄

8 " Castle Nut

7 ⁄ 8 " Flat Washer

Tie Rod Nut Cotter Pin

Stop Bolt Service Kit, One Side, Includes Key Nos. 19-20 ½"-13 UNC Square Head Bolt

Roller Thrust Bearing Service Kit , Includes Key Nos. 9-12 & Loctite

60961-042

2 2 2

6 7 8 9

59156-000 58937-000 58909-000 64256-000L 60259-001X 60259-002 58910-001

Grease Cap Assembly

4 4 4 2

½"-13 UNC Hex Jam Nut

Retaining Ring Kingpin Bushing

ABS Sensor Sleeve

1½"-12 UNF Inner Wheel Bearing Adjusting Nut 2 Stabilizer Connection Aftermarket Service Kit, One Side, Includes 5 ⁄ 8 " Studs,Washers & Locknuts

Roller Thrust Bearing

10

Kingpin Shim

As Req.

0.005" Thickness (Pack of 4)

0.047" Thickness

11

Kingpin Seal, Replaces 58910-000

4

NOTES: * Item included in kit / assembly only, part not sold separately. ** Axle spring seats come assembled with the axle beam and are not serviceable. *** New air springs will be required when replacing the axle assembly, use International Truck’s new air spring Part No. 3627997C2 (replaces Part No. 362797C1).

273

Reference Lit. No. SP-215 | 1-866-755-5968

Powered by