FRONT SUSPENSIONS STEERTEK ™ NXT High Capacity Axle – Rosenbauer
■ Selection Guides TABLE 1
Leaf Spring Assembly and Components
1" Flat Washer (Use only as
Leaf Spring & Clamp Group Assembly
Clamp Group Service Kit
Leaf Spring Assembly Key No. 30
1" Hex Bolt Key No. 25
Spring Spacer Key No. 32
Ride Height
specified) Key No. 26
Capacity
Part Number Length Part Number Part Number Thickness Part Number
Refer to Parts List for Contents
8"
80141-101 34013-278
7"
64107-002
---
---
---
18K
82378-050
1"
79814-000
9.82"
80141-102 34013-256
9"
64107-003
22962-051
0.82"
80298-000
8"
80141-201 34013-278
7"
64107-002
---
---
20K
82379-050
---
1"
79814-000
9.5"
80141-202 34013-279
8.5"
64107-006
0.5"
80223-000
8"
80141-001 34013-254
7.5"
64107-000
---
---
24K
82380-050
22962-051
9"
80141-002 34013-255
8.5" 79814-000 USE 1" FLAT WASHERS (PART NO.22962-051) ONLY AS SPECIFIED IN TABLE 1 (LEAF SPRING AND CLAMP GROUP ASSEMBLY).TABLE 1 LISTS DIFFERENT CONFIGURATIONS FOR THIS ASSEMBLY. IN CERTAIN CONFIGURATIONS,THE CLAMP GROUP REQUIRES THE USE OF 1" FLAT WASHERS (PART NO. 22962-051) WITH THE SPECIFIED 1" HEX BOLT LENGTH, BUT NOT IN OTHER CONFIGURATIONS. IMPROPER CLAMP FORCE IN THE LEAF SPRING AND CLAMP GROUP ASSEMBLY, IMPROPER SEATING,AND COMPONENT DAMAGE CAN CAUSE LOSS OF VEHICLE CONTROL, ADVERSE VEHICLE HANDLING,PROPERTY DAMAGE,AND PERSONAL INJURY. 64107-006 1"
Axle Assembly • Knuckle Assembly • Tie Rod Arm • Tie Rod Assembly
TABLE 2
Knuckle Assembly
***Tie Rod Arm
**20K Tie Rod Assembly
Wheel Base
Capacity
Axle Assembly
Left Hand Right Hand Left Hand Right Hand Key No. 39 Key No. 40 Key No. 60 Key No. 61
Key No. 65
18K Single Steer, Left Hand Drive 18K Single Steer, Right Hand Drive 20K Twin Steer
80140-002 77243-001 77243-102
180-210
77244-033 77244-034
80140-003 77243-101
80721-002
80140-004
77243-002
211-240
20K Twin Steer
80140-005
77244-035 77244-036
77243-001
24K with 425 mm Tires 80140-006
77244-037 77244-038
240-260
80721-003
24K with 445 mm Tires 80140-007
77244-039 77244-040
248
www.hendrickson-intl.com | Reference Lit. No. SP-311
For Special Tools see Page 565
Powered by FlippingBook