AIRTEK ® with STEERTEK ™ NXT • STEERTEK ™ Axle Freightliner • Western Star Vehicles
FRONT SUSPENSIONS
■ Tie Rod Selection Guide
Wheel Base
Tie Rod Assembly Part Number
Tie Rod End Part Number
Tie Rod End Service Kit No.
Axle Model
KPI
Vehicles built AFTER November 2014
150" 200" 250" 150" 200" 250"
76877-001 76877-002 76877-003 76879-001 76879-002 76879-003
60961-734 (Axle Set) 60961-736 (LH) 60961-741 (RH) 60961-735 (Axle Set) 60961-742 (LH) 60961-743 (RH)
STEERTEK NXT 12K
70995-001 (LH) 70995-002 (RH)
70.9
STEERTEK NXT 13.3K
76876-001 (LH) 76876-002 (RH)
70.9
Tie Rod Assembly Replacement Part No.
Vehicles built PRIOR TO November 2014
150" 200" 250" 150" 200" 250"
60239-001 60239-002 60239-003 60239-004 60239-005 60239-006
76877-001 76877-002 76877-003 76877-004 76877-005 76877-006
70.9
♦ Tie rod end kits are no longer available for these assembly numbers, requires complete tie rod assembly replacement.
STEERTEK NXT STEERTEK
69
Vehicles built AFTER November 2014
150"/ 200"
76878-001
60961-737 (Axle Set) 60961-739 (LH) 60961-740 (RH)
76875-001 (LH) 76875-002 (RH)
STEERTEK NXT
70.9
250"
76878-002
Tie Rod Assembly Replacement Part No.
Vehicles built PRIOR TO November 2014
♦ Tie rod end kits are no longer available for these assembly numbers, requires complete tie rod assembly replacement.
76878-001 76878-002 76878-003
150"/ 200"
66699-001 66699-002 66699-003
70.9
STEERTEK NXT STEERTEK
250"
150"/ 200" 69
NOTE: ♦ H endrickson supplies various tie rod assemblies. Locate the tie rod assembly part number on the tie rod tube to help determine the tie rod end kit or complete tie rod assembly replacement needed for service as shown in this Tie Rod Selection Guide.
NOTES: * Not supplied by Hendrickson, used for reference only. Hendrickson is not responsible for components supplied by the vehicle manufacturer. For assistance with maintenance and rebuild instructions on these components see vehicle manufacturer. ** Item included in kit / assembly only, part not sold separately. *** All new replacement STEERTEK axles and upper steering knuckle components for Freightliner, Sterling and Western Star Vehicles will incorporate 5 ⁄ 8 " fine threaded holes for brake spider mounting bolts.Vehicles built prior to 6/28/2004 that are receiving a replacement of the STEERTEK axle or upper knuckle will require — a change from coarse thread brake spider mounting bolts to fine thread brake spider mounting bolts.The brake spider mounting bolts are supplied separately by Freightliner, Sterling and Western Star, refer to vehicle manufacturer for bolt dimensions and torque specifications. Hendrickson will not be responsible for any damage to the STEERTEK upper knuckle components resulting from using the improper brake spider mounting bolts. **** No longer available, contact Hendrickson for replacement.
Hendrickson AIRTEK Ride Height Gauge for Freightliner and Western Star Vehicles Literature No. 45745-159 can be obtained on-line at www.hendrickson-intl.com/Litform
31
Reference Lit. No. SP-169 | 1-866-755-5968
Powered by FlippingBook