PRIMARY FIXED SUSPENSION SYSTEM
INTRAAX ® Suspension Components
ITEM DESCRIPTION
PART NO.
QTY. NOTE
15 ALIGNMENT COLLARS 15a Eccentric
S-20925
2 Pivot bolt hole is offset from center of collar
15b Concentric
S-20924
2 Pivot bolt hole is in center of collar
16 QUIK-ALIGN ® PIVOT BOLT KIT 4 16a Pivot bolt kit
S-24679
2 Includes10" shear-type bolt, nut, and washers
16b Pivot bolt kit w/bushing tube spacers Standard
S-26369
2 Includes10" shear-type bolt, nut, washers, and std. bushing tube spacers (Item 18) 2 Includes10" shear-type bolt, nut, washers, and off-highway bushing tube spacers (Item 18) 2 Includes10" shear-type bolt, nut, washers, and alignment collars 2 Includes bushing, pivot bolt kit (Item 16a), std. bushing tube spacers (Item 18) and lube 2 Includes bushing, pivot bolt kit (Item 16a), off-highway bushing tube spacers (Item 18) and lube 1 Includes 2 bushings, 2 pivot bolt kits (Item 16a), std. bushing tube spacers (Item 18) and lube
Off-Highway
S-40394-1
16c Pivot bolt kit w/alignment collars
S-24680
17 TRI-FUNCTIONAL ® BUSHING KIT 4,5 Standard
S-24691
Off-Highway
S-40393-1
Standard pivot bushing kit w/alignment collars
S-28654
4 required per axle
18 BUSHING TUBE SPACERS
Standard
4 4
S-21099
Off-Highway
S-40230-1
19 FRONT SHOCK ABSORBER 6.5" - 9" Ride heights
S-23651 S-24579 S-23566 S-24023 S-2212 S-23316 S-20345 S-25436 S-25437
2 Standard travel, standard duty cycle 2 Standard travel, extended service 2 Standard travel, standard duty cycle 2 Standard travel, extended service 2 Standard travel, standard duty cycle 2 Standard travel, extended service
6.5" - 9" Ride heights
12" Ride height 12" Ride height
14" - 19" Ride heights 14" - 19" Ride heights
20 REAR SHOCK ABSORBER (Not Shown) 6.5" - 7.5" Ride heights
2 2 2
9" - 12" Ride heights 14" - 17" Ride heights
5-inch LDA ™ S-24757/2 S-31080/2 S-2157/2 S-2157/2
21 SHOCK BOLT KIT
21a Front shock absorber
2 (1) One kit per shock
21b Rear shock absorber (Not Shown) 2 (1) One kit per shock 4. Best installed with Hendrickson’s E-20 socket S-24536 (1-inch drive sleeveless), S-25119 (1-inch drive sleeve) or S-24303 (3/4-inch drive sleeveless). 5. Bushing tool S-21307 is required to correctly rebush the suspension.
73
www.hendrickson‑intl.com
Refer to Hendrickson Literature No. L1060 - INTRAAX ® AAL Parts List
Powered by FlippingBook