PRIMARY FIXED SUSPENSION SYSTEM
INTRAAX ® Suspension Components
PER AXLE
ITEM DESCRIPTION
PART NO.
NOTE
16 AIR SPRING PEDESTAL KITS
Includes 2 pedestals, 4 nuts, and 4 screws
LDA and Five Inch Axle: Standard Travel (or) Limited Rebound Travel 13.5" – 14" ride heights S-32164-1 2
Kit uses bolt-on cast pedestals D-36230-1L/1R Kit uses bolt-on steel pedestals B-30827-2L/2R Kit uses bolt-on steel pedestals B-30827-3L/3R Not available on 13.5", 18", 19" ride heights Kit uses bolt-on steel pedestals B-30827-2L/2R Kit uses bolt-on steel pedestals B-30827-3L/3R
15" – 16" ride heights 17" – 19" ride heights
S-32164-2 S-32164-3
2 2
LDA and Five Inch Axle: Limited Jounce Travel
14" – 15" ride heights 16" – 17" ride heights
S-32164-2 S-32164-3
2 2
5" Axle (Weld-On) Pedestal 13.5" – 19" ride heights
S-32164-1
2
Use bolt-on S-32164-1. Follow directions on B-32164 drawing. Weld-on option obsolete. Replace with bolt-on number listed above.
17 AIR SPRING SPACER ASSEMBLY (Not Shown)
Contact Hendrickson for assistance
18 ALIGNMENT COLLARS 18a Eccentric
S-20925 S-20924
2 2
Pivot hole is offset from the center of collar
18b Concentric
Pivot hole is in center of collar
19 QUIK-ALIGN® PIVOT BOLT KIT 7 19a Pivot bolt kit
S-24679
2
Includes10" shear-type bolt, nut, and washers
19b Pivot bolt kit w/ bushing tube spacers Standard
S-26369
2
Includes10" shear-type bolt, nut, washers, and std. bushing tube spacers (Item 21) Includes10" shear-type bolt, nut, washers, and off-high- way bushing tube spacers (Item 21) Includes10" shear-type bolt, nut, washers, and alignment collars Includes bushing, pivot bolt kit (Item 19a), std. bushing tube spacers (Item 21) and lube Includes bushing, pivot bolt kit (Item 19a), off-highway bushing tube spacers (Item 21) and lube Includes 2 bushings, 2 pivot bolt kits, bushing tube spacers and lube
Off-Highway
S-40394-1
2
19c Pivot bolt kit w/ alignment collars
S-24680
2
20 TRI-FUNCTIONAL ® BUSHING KIT 5,7,8 Standard
S-24691
2
Off-Highway
S-40393-1
2
Standard pivot bushing kit w/alignment collars
S-28654
1
21 BUSHING TUBE SPACERS
4 required per axle; Standard
Standard
S-21099
4 4
Off-Highway
S-40230-1
22 FRONT SHOCK ABSORBER 23 SHOCK ABSORBER BOLT KIT
See L1287 Shock Parts List One 1 required per shock
23K and 25K models shipped before 8/11/95 S-20896/2
2 2 2 2 2
23K and 25K models shipped after 8/11/95
S-24021 S-24021
30K front mounted shock 30K rear mounted shock
S-20031/2
24 SHOCK SPACER
S-27196
7. Best installed with Hendrickson’s E-20 socket S-24536 (1-inch drive) or S-24303 (3/4-inch drive) 8. Bushing tool, S-21307 is required to correctly rebush the suspension.
61
www.hendrickson‑intl.com
Refer to Hendrickson Literature No. L405 - INTRAAX ® AAT Parts List
Powered by FlippingBook