Tire Pressure Control System
TRAILER PARTS CATALOG
5a
4
80
3a
6
5
7
4
3
8
9
2
1
10
11
TIREMAAX ® TIRE INFLATION SYSTEM
0
bar psi 100xkPa
This TIREMAAX ® controller assembly has been factory preset to a cold inflation pressure of: psi If the indicator lamp remains on continuously for more than 10 minutes, one or more tires may be low or the system requires service. In the event of a system leak, set the trailer park brake, then close the controller supply valve. NOTE: If equipped with TIREMAAX PRO, while trailer park brakes are set, lamp operation is disabled and no delivery pressure is present. For complete service details, refer to Hendrickson publication T51002, TIREMAAX Installation, Service and Troubleshooting Procedures . Or call the Hendrickson Technical Services Department in the United States and Canada at 866-RIDEAIR (743-3247).
Trailer Commercial Vehicle Systems 2070 Industrial Place SE Canton, OH 44707-2641 USA 866.RIDEAIR (743.3247) 330.489.0045 FAX 800.696.4416
Trailer Commercial Vehicle Systems 250 Chrysler Drive, Unit #3 Brampton, ON Canada L6S 6B6 905.789.1030 FAX 905.789.1033
www.hendrickson-intl.com
T50015 Rev A 11-14 ECN 23615 Printed in the United States of America
©2014 Hendrickson USA, L.L.C. (U.S. Rights) Hendrickson Intl Corp. (Rights Outside U.S.) All Rights Reserved
3b
5b
3c
8a
6
PART NO.
QTY.
NOTE
ITEM DESCRIPTION 1 PLUG DRIVER a HN (1.75")
S-28146-1 S-28146-2 S-28146-3
1 1 1 1 1 1 1 1 1
b HP (2.50")
c HP and HUS ® / P90 (2.75")
d Driver Handle
S-27399 S-29430
2 SPANNER WRENCH
3
TARGET GAUGE a PRO
VS-32331 VS-32344 VS-30468
b CP with Hubcap-Mounted Rotary Union c CP with Spindle-Mounted Rotary Union 4 PRO-LB / PRO FIELD ADJUSTMENT TOOL
VS-41241-1
5 DECAL
a PRO / CP Blank PSI Decal
T50015
Fill in and adhere to controller lid after resetting cold tire pressure Fill in and adhere to controller lid after resetting cold tire pressure
1
b PRO-LB Blank PSI Decal
T50019
1
6 PRESSURE TESTER
VS-28707
1
For EC controller
7 TIRE HOSE / WHEEL GROMMET (Not Shown) a 1.5" Hand Hole with Offset Valve Stem b 2.0" Hand Hole with Centered Valve Stem c 2.5" Hand Hole with Centered Valve Stem d 2.5" Hand Hole with Offset Valve Stem
VS-33675 VS-33107 VS-33108 VS-33109
2 2 2 2 1 1 1 1
(2) Grommets per kit (2) Grommets per kit (2) Grommets per kit (2) Grommets per kit
8 CP / PRO / PRO-LB HUBODOMETER MOUNTING BRACKET KITS
For models with hubcap-mounted rotary union
a HN b HP
VS-41837-1 VS-41837-2 VS-41837-3 VS-41837-4
Bracket and fasteners Bracket and fasteners Bracket and fasteners
c Extended HP
d HX
Bracket and fasteners. For use with Outboard Mounted Rotor.
335
www.hendrickson‑intl.com
Refer to Hendrickson Literature No. L878 - TIREMAAX ® Parts List
Powered by FlippingBook