INTRAAX ® SP Platform Slider
SLIDER SUSPENSION SYSTEM
SLIDER BOX ASSEMBLY All suspensions are 23K capacity; system capacity for tandem is 46K. I-beam centers are 37" and 38" for 42" box width with 71.5" axle track. I-beam centers are 43" and 44" for 48" box width with 77.5" axle track. Axle spacing or “spread” is measured from center of front axle to center of rear axle.
ITEM DESCRIPTION
PART NO.
TANDEM SYSTEM QTY.
NOTE
1 2 3
AFTERMARKET SLIDER BOX REPLACEMENT
AMBOX.XX
1 1
Please contact Hendrickson for assistance
BRAKE CHAMBER QUIK-DRAW ® VALVE
A-23039
Type 12 modified
See L751 QUIK-DRAW Parts List See L751 QUIK-DRAW Parts List See L751 QUIK-DRAW Parts List See L751 QUIK-DRAW Parts List See L751 QUIK-DRAW Parts List See L751 QUIK-DRAW Parts List See L751 QUIK-DRAW Parts List See L751 QUIK-DRAW Parts List See L751 QUIK-DRAW Parts List See L751 QUIK-DRAW Parts List
4 QUIK-DRAW VALVE KNOB with SCREW SET (Not shown)
5 6 7 8 9
LOCKING PIN
LOCKING PIN SPRING
CLEVIS PIN SPRING PIN
LOCKING PIN LINK
10 LOCKING PIN WASHER
11 PIN WASHER
12 LOCKING PIN LINK COTTER PIN
13 PIPE WELDMENT KIT
Includes pipe weldment, crank weldment, crank arm actuator and pipe ring stop
Single Axle
S-28044-1 S-28044-2 S-28044-3 S-28044-4
1 1 1 1 4 4 1 1 2
51" weldment 99" weldment 111" weldment 123" weldment
Tandem, 49" Axle Spread Tandem, 60" Axle Spread Tandem, 72" Axle Spread
14 INNER LOCK PIN CAGE ASSEMBLY
S-27000 S-34055
Units built before April 2014 Units built April 2014 and after
15 OUTER LOCK PIN CAGE REPLACEMENT KITS No Shims, Per Slider
S-28658-1 S-28658-2 S-28658-3
Includes (4) pin cages and (16) bolts Includes (4) pin cages and (16) bolts Includes (1) curbside and (1) roadside cage and bolts Includes (1) curbside and (1) roadside cage and bolts
With Outer Shims, Per Slider
No Shims, front
With Outer Shims, Rear
S-28658-4
2
16 PIN CAGE BOLT (Bolts are Included in Kits)
SA-6900-20
16
Four (4) per cage, (16) per slider
Quantity of (1) needed for single; (2) need- ed for tandem. Includes (2) 49" pads and (10) screws
17 SLIDER WEAR PAD KIT
S-28641
1
18 STINGER (Not Shown)
S-27028-1
1
Includes (1) stinger and hardware
NOTE: Identification tag can be found on the roadside slider box rail above the front frame bracket gusset. There is also a blank INTRAAX ® tag on the inside of the curbside beam.
SLIDER PINS
Units built before April 2014
Units built after April 2014
6
6
10
7
7
5
5
11
11
12
12
8
250
Trailer Commercial Vehicle Systems
Refer to Hendrickson Literature No. L931 - INTRAAX ® SP Platform Slider
Powered by FlippingBook