Warehouse/PDC Recommended Stocking List
STOCKING LIST
DESCRIPTION
PART NO.
RECOMMENDED STOCK QTY.
PIVOT CONNECTION HARDWARE Alignment collar — most welded alignments Alignment collar — QUIK-ALIGN ® concentric (inner) Alignment collar — QUIK-ALIGN eccentric (outer) Bushing tube spacer — wide pivot connection Bushing tube spacer — narrow pivot connection
S-2770 S-20924 S-20925 S-21099 S-26807
10 10 10 10 10
Alignment collar — HT ™ Series Y-Beam HT250U-Y suspension applications with welded alignment
S-7349
2
PIVOT BOLT KITS (Alignment collars not included) QUIK-ALIGN, wide bushing
S-24679 S-24705 S-7345 S-3646
10 10
QUIK-ALIGN, narrow bushing
Welded alignment, HT Series Y-Beam HT250U-Y suspension
2 5
Welded alignment, wide bushing
U-BOLT KITS (One U-bolt with nuts and washers) HT Series HT250US suspension (5.5" and 6.5" RH, flattened bolt) Most HT/HS Series top-mount and HT Series underslung HT190U suspensions
S-22894/4 S-21140/4 S-3650/4 S-20701
1 4
Most HT/HS Series underslung suspensions Axle spacer (Must use with flattened U-bolt)
OPTIONAL
2
TOOLS Bushing Tool, wide bushing Bushing Tool, narrow bushing
S-21307 S-24736 S-24536
1 1 1
E-20 socket — 1" drive
QUIK-DRAW ® PNEUMATIC PIN PULL SYSTEM Three-way auto reset valve with fittings
VS-25224 VS-25223 S-28061-2 S-28062-2 S-35294-2 S-35295-2
4 2 1 1 1 1 4 2 2 2 2 2
Three-way auto reset valve
48" & 54" box front actuator (cast iron - units built before Feb. 2015) 48" & 54" rear actuator (cast iron - units built before Feb. 2015)
48" & 54" box front actuator with fittings (composite - units built in and after Feb. 2015) 48" & 54" rear actuator with fittings (composite - units built in and after Feb. 2015)
SLIDER ACCESSORIES Body rail clip — 2" hole centers (HS sliders) Body rail clip — 1.5" hole centers (HS sliders)
S-22366 S-14108 S-24460 S-24459 S-25593 B-21505
Body rail clip — use with 6" hole centers and 1.375" locking pin Body rail clip — use with 4" hole centers and 1.625" locking pin
SURELOK ® air spring actuator assembly
Handle — manual or customer supplied slider pin release
SLIDER LOCKING PIN UNITS BUILT BEFORE SEPT. 2012 1.375" Diameter, 4" hole center (TTMA)
S-28290 S-28290 S-28289
4 4 4
1.375" Diameter, 6" hole center 1.625" Diameter, 4" hole center
23
www.hendrickson‑intl.com
Refer to Hendrickson Literature No. No. L1000 - Warehouse/PDC Stocking List
Powered by FlippingBook