VANTRAAX ® HKANT 46K Slider Top-Mount
SLIDER SUSPENSION SYSTEM
SLIDER BOX ASSEMBLY
SYSTEM
ITEM DESCRIPTION
PART NO.
QTY. NOTE
1 2 3
AFTERMARKET BOX REPLACEMENT
AMBOX.###
Contact Hendrickson for assistance See L751 QUIK-DRAW Parts List
QUIK-DRAW ® COMPONENTS
HANDLE ASSEMBLY Manual and customer supplied release mechanisms
S-25592 B-22923
1 Handle and grip assembly
Mechanical air assist release mechanisms
1 Handle only
4
HANDLE BOLT
SA-1100-10
2 2-3/8"-16 × 1-1/4" hex head bolt, grade 5 2 2-3/8"-16 lock nut, grade B
5 6
HANDLE NUT
SA-9000-5
HANDLE MOUNT Manual Customer supplied Mechanical air assist
C-21275 S-23534 C-23231
1
1 Includes crank arm bolt kit
1
7
CRANK ARM WELDMENT Manual and customer supplied
B-33010 B-33010
2 For front and rear of slider box
Mechanical air assist
1 For rear of slider box
8
PIPE WELDMENT Manual and mechanical air assist
S-21433
1 1
Customer supplied BODY RAIL CLIP 3.4" clip height
S-21433-1
9
S-24459
4 Use with 4" hole centers and 1.625" locking pin 4 Use with 6" hole centers and 1.395" locking pin 8 1/2"-13" × 1-1/2" flanged bolt
3.8" clip height
S-24460
10 11 12
BODY RAIL BOLT
SA-6900-2
BODY RAIL CLIP SPACER SLIDER WEAR PAD KIT 49" Axle Spacing
A-22367
4 2" clip hole centers
S-14342-3
2 Includes (1) slider wear pad, (8) nuts and (8) screws 6 Includes (1) slider wear pad and (4) screws
121" Axle Spacing
S-27566
Note: Narrow hanger shown. Pin pull mechanisms are identical for both wide and narrow width slider models. Note: Identification can be found on the roadside slider box rail above the front frame bracket there will also be a blank INTRAAX ® tag on the inside of the curbside beam
197
www.hendrickson‑intl.com
Refer to Hendrickson Literature No. L890 - VANTRAAK ® HKANT Parts List
Powered by FlippingBook