ULTRAA-K ® Axle / Suspension Air Slider
SLIDER SUSPENSION SYSTEM
SLIDER BOX ASSEMBLY
SYSTEM QTY.
ITEM DESCRIPTION
PART NO. AMBOX.###
NOTE
1 AFTERMARKET SLIDER BOX REPLACEMENT
1
Contact Hendrickson for assistance See L751 QUIK-DRAW Parts List
2 QUIK-DRAW ® COMPONENTS
3 BODY RAIL CLIP 3.4" clip height
S-24459 S-24460
4 4 8
Use with 4" hole centers Use with 6" hole centers
3.8" clip height
4 BODY RAIL BOLT
SA-6900-2
1/2"-13" × 1-1/2" flanged bolt
5 BODY RAIL CLIP SPACER (Units built before August 2015) (not shown) 1.5" clip hole centers A-21282
4 4
2" clip hole centers
A-22367
6 BOLT-ON SHIM .188" thickness
S-34860 S-34860 S-34859 S-34859
4 2 4 2 2 2 2 2 2
6" body rail hole spacing 4" body rail hole spacing 6" body rail hole spacing 4" body rail hole spacing
.188" thickness .232" thickness .232" thickness
7 BOLT-ON END STOP (4" body rail hole spacing only) .188" thickness
S-34821-1 S-34821-2 S-35761-1 S-35761-2 S-14342-3
Left front rail and right rear rail Right front rail and left rear rail Left front rail and right rear rail Right front rail and left rear rail Includes (1) slider wear pad with fasteners
.188" thickness .232" thickness .232" thickness
8 SLIDER WEAR PAD KIT
9 MUD FLAP BRACKET KIT
S-34886
2
Includes (1) mud flap bracket assembly, (1) mud flap angle and hardware
10 MUD FLAP ANGLE KIT
S-35021
2
Includes (1) mud flap angle and hardware
Note: Identification can be found on the roadside slider box rail above the front frame bracket. There will also be a blank ULTRAA-K tag on the inside of the curbside beam.
177
www.hendrickson‑intl.com
Refer to Hendrickson Literature No. L1237 - ULTRAA-K ® Parts List
Powered by FlippingBook